Product Overview: Dingli Tilt Sensor Model DL-00000694

DL-00000694 Dingli Sinoboom Zoomlion Electric Drive Scisssor Lift X1.5 Y3.0 Tats Tilt Sensor Fit for JCPT1614HD JCPT1612H...

The Dingli Tilt Sensor, model DL-00000694, is a precision-engineered inclinometer designed for robust performance in heavy-duty construction machinery. It serves as a critical safety and operational component, providing real-time measurement of the equipment's tilt angle to prevent tip-overs and ensure stable operation.

This specific model is an OEM (Original Equipment Manufacturer) replacement part certified for use in several models of Dingli mobile elevating work platforms (MEWPs), most notably the JCPT1614HD, JCPT1612HDB, and JCPT1612HDS series of articulating and telescopic boom lifts.

Key Features and Specifications

• Primary Function: Measures the inclination (tilt) of the machinery relative to the ground plane on both the X and Y axes (side-to-side and forward-backward tilt).

• Critical Safety Device: Directly interfaces with the machine's control system. If the machine is on an excessive slope beyond its safe operating parameters, the sensor will trigger an alarm and may restrict certain functions (like boom extension or driving) to prevent a potential accident.

• High Precision: Utilizes advanced MEMS (Micro-Electro-Mechanical Systems) or electrolytic technology to deliver accurate and reliable angle measurements, often with a resolution of within 0.1°.

• Robust Construction: Built to withstand the harsh conditions of construction sites, including:

  • Vibration & Shock Resistance: Engineered to perform reliably despite constant machine movement and operation on rough terrain.

  • Environmental Sealing: Typically rated IP67 or similar, making it dust-tight and protected against temporary immersion in water, ensuring durability in rain, dust, and mud.

  • Temperature Tolerance: Operates effectively across a wide industrial temperature range (e.g., -40°C to +85°C / -40°F to +185°F).

• Output Signal: Provides a standardized electronic signal (e.g., PWM, CANbus, or voltage output) that is easily interpreted by the machine's central PLC (Programmable Logic Controller) or control board.

• Easy Calibration: Designed for straightforward installation and calibration using the manufacturer's recommended procedures to ensure accuracy after replacement.

Compatible Machine Models

This sensor is explicitly designed as a direct replacement for the tilt sensor in the following Dingli boom lift models:

• Dingli JCPT1614HD

• Dingli JCPT1612HDB

• Dingli JCPT1612HDS

*(It is always recommended to verify the part number DL-00000694 against your machine's manual or existing component before purchase, as specifications can change).*

Typical Applications

The sensor is exclusively used in mobile elevating work platforms (MEWPs) for:

• Static Stability Monitoring: Continuously checking the level of the machine while the boom is elevated and the machine is stationary.

• Slope Operation Safety: Allowing the operator to safely drive the machine on a grade within pre-defined limits (Slope Leveling Function).

• Auto-Leveling Systems: Providing the essential data input for systems that can automatically level the machine using outriggers or stabilizers.

• Load Moment Limitation: Contributing data to complex systems that calculate the safe working load and reach of the boom based on the machine's angle.

•